PaintPro SYSTEM
The Paint Pro system consists of a 2-part handle with a piston and chamber to suck and hold about 650ml (max) of paint. The piston pushes measured quantities of paint into the “even-flow-technology” tip which distributes the paint evenly on the foam-roller. This foam-roller releases paint on the wall, on press-rolling over it.
There’s a special valve provided at the end of the chamber. Through this valve, paint can be sucked in, or the balance paint in the chamber emptied into, the Paint Can.
HOW TO USE
Using the PaintPro System is very easy. Prepare the wall surface by cleaning, buffing, sandpapering it to desired levels of evenness and clean liness. Remember: Any trace of oil on the surface will repel paint.
Open the Paint Can lid and fix the special adapter lid provided. Just attach the valve mouth to the corresponding vent on the lid, suck paint to fill the chamber in the PaintPro handle to its maximum. Detach PaintPro from the adapter and use.
After painting is done, empty any leftover paint in the chamber into the paint can by again attaching the valve mouth to the vent on the lid. This way, wastage of paint is completely avoided.
